ECCOSORB VHP-NRL

Eccosorb VHP-NRL
  • Solid, pyramidal shaped, carbon loaded urethane foam absorber.
  • Construction of anechoic chambers or covering test equipment.
  • Antenna, RCS and EW anechoic chambers.
  • Standard height: 5.6 to 114 cm.
  • Reflectivity versus frequency depends on the height of particular grade.

 

 


ECCOSORB HHP-60-NRL

Eccosorb HHP-60-NRL
  • Hollow, pyramidal shaped, carbon loaded polyurethane foam absorbers.
  • Very good performance starting at low frequencies (from 100 MHz)
  • Hollow design produces scattering of energy, which is reflected from the surface.
  • Thick wall material provides impedance matching at all frequencies
    Geometrical shape provides impedance matching at longer wavelengths.
  • Base dimensions of 61 x 61 cm

 

 


ECCOSORB HX-NRL

Eccosorb HX-NRL
  • Flat-top, reinforced hollow pyramidal absorber.
  • Large shielded semi-anechoic chambers for radiated emission testing.
  • Applications at very low frequencies.
  • Three standard heights.
  • Delivered with white caps.

 

 


ECCOSORB HFX-HC

Eccosorn HFX-HC
  • Hollow pyramidal absorber.
  • High-power applications.
  • Lossy honeycomb material with fire-retardant properties.
  • High-power density areas; Near-field scanner applications.
  • Compact Antenna Test ranges.
  • Standard height of 18 and 36 inches.
  • Larger power handling capability.

 

 


ECCOSORB VHY-NRL

Eccosorb VHY-NRL
  • Solid, pyramidal shaped, carbon loaded hybrid absorber.
  • EMC test chamber, on top of ferrite tiles.
  • Used in fully compliant 3 and 10 meter chambers.
  • Optimal layout determined by numerical simulations.
  • Available in four thicknesses, base dimensions of 60 x 60 cm.
  • Can be delivered whit white caps.

 

 


ECCOSORB VX-NRL

Eccosorb VX-NRL
  • Solid, flat-top, pyramidal shaped, carbon loaded urethane foam absorber
  • MIL-STD-462
  • Excellent performance starting from 80 MHz
  • Base dimensions 61 x 61 cm, standard height of 50.8 or 76.2 cm

 

 


ECCOSORB FS-NRL

Eccosorb FS-NRL
  • Low-cost, solid, flat-sheet foam absorber.
  • Available in various thicknesses and conductivities.
  • Used in antenna, RCS and EW anechoic chambers.
  • To cover corners and difficult to cover areas.
  • Available in different grades.

 

 


ECCOSORB FHY-NRL

Eccosorb FHY-NRL
  • Thin, flat, multi-layered hybrid absorber.
  • EMC test chambers.
  • To be used on top of ferrite tiles.
  • Available in two grades, according to the required performance.
  • Optimal layout depends on the precise chamber dimensions and test configuration.

 

 


ECCOSORB VHP-FL

Eccosorb VHP-FL
  • Floor version of ECCOSORB VHP-NRL.
  • Rectangular volume with a polyvinyl chloride skin on surfaces.
  • Consists of pieces of ECCOSORB VHP having wedges of rigid foam filling the spaces between the pyramids.
  • Available in several grades, corresponding to the ECCOSROB VHP-NRL.

 

 


ECCOSORB WG-NRL

Eccosorb WG-NRL
  • Made from bulk resistive polyurethane foam.
  • Surface wedge configuration.
  • Well suited for covering regions of rectangular chambers.
  • Propagation down the taper of a tapered chamber.
  • Differs in surface geometry: low weight, flexibility, high light reflectance, good resistance to physical damage and ease of mounting.

 

 


ECCOSORB FT

Eccosorb FT
  • Sintered ferrite absorber tile.
  • Free-space wave absorber and/or surface current suppressor.
  • Material should be in close contact with a metallic backing.
  • Suppression of resonances in shielded enclosures.
  • Anechoic lining of compact EMC test rooms.
  • Dimensions of 10 x 10 cm, available in two grades.

 

 


ECCOSORB CV

Eccosorb CV
  • Premium quality tapered broadband microwave absorber.
  • Available in three grades.
  • Millimeter wave frequencies and very wide incidence angles.
  • Lining tapered walls of tapered anechoic chambers.
  • Absorbing collars around the edges of high performance antennas.

 

 

 

E&C ADHESIVE 13111

Adhesive 13111
  • General purpose glue.
  • Spray able, based on a synthetic rubber.
  • Recommended adhesive for ECCOSORB foam absorbers.
  • Available in 1 liter and 5 liter containers.

 

 


E&C ADHESIVE 5124

E&C Ahesive 5124
  • Acrylic adhesive, used with an initiator
  • Ability to bond a wide variety of materials
  • Available in 320 ml cartridges PTA, supplied with 35 ml initiator
  • Recommended for bonding ECCOSORB FT